Power Adapter for Mobile Devices
$34.99 / Web Price
The VC-OEM allows you to place a mobile device up to 50ft (15m) away from an AC power source while fully charging the device. This allows mobile devices to be installed in locations where there are no easily accessible AC outlets or in environments where extension cords or dedicated AC lines are prohibited, inconvenient or expensive. The VC-OEM is ideal for retail, hospitality, and digital signage applications.
The simple plug and play nature of the VC-OEM makes it an easy low cost alternative to Power-Only, Power over Ethernet (PoE) setups. This eliminates the need for complex and expensive Power Injectors or PoE capable network switches, in order, to place mobile devices in isolated or far off locations.
Since the VC-OEM operates at or below 36 Volts DC, it can be used to supply power in permanent and semi-permanent installations (adhering to local electrical codes) with minimal installation cost. This eliminates the requirement for a licensed electrician to install and run a dedicated AC power line.
The VC-OEM uses an on board DC-DC voltage converter that takes the input 9-36 VDC power and steps it down to the 5 Volts required by most mobile devices.
The USB-A port located on the power adapter allows you to connect any standard charging cable (use of the cable originally supplied with the mobile device is recommended) to the VC-OEM. This makes the VC-OEM a universal power adapter that is able to supply 2 Amps at 5 Volts to any mobile device from up to 50 feet away from the main AC power source (Note: Apple users will only be able to draw 0.5 Amps at 5 Volts (2.5 Watts) of power).
The OEM designation on the power adapter means that the unit is sold without a casing (board only) and in the smallest size possible. This allows the VC-OEM to be easily integrated into casings, enclosures, existing installations, and tight areas where space is at a premium.
*Please note the VC-OEM is designed to generate minimal amounts of heat (so as not to cause damage to its surroundings). However, the adapter may get slightly warm to the touch during operation.
VC-OEM Power Adapter for Mobile Devices
➤ Device power up to 50 ft (15m) from AC source
➤ Universal mobile device compatibility
➤ No casing (board only)
➤ Designed for commercial/OEM use
➤ Built-in voltage converter
➤ LAVA Limited Warranty
POINT OF SALES
- Product Catalogues
- Price Checking
- Line Busting & Ticketing
- POS systems
- Menus, order taking
- Transportation & Logistics endpoints
- Digital Signage
- Conference RoomScheduling
- In-vehicle data capture
- Virtual Concierge
- Patient Check In
- Web/Video conferencing
- Trade Show Guides
- Customer Surveys
- Remote control
- Material tracking
Power Supply: 9 – 36 VDC power supply with Barrel Jack Connector (2.0mm Centre Pin Positive)
Recommended that power supply be capable of outputting at least 10 Watts of power
Cables sourced separately
Note: It is recommended that the cable provided with the mobile device be used
1 x USB A port (power output)
1 x Barrel Jack Connector, 2.0mm Centre Pin Positive (power input)
Between 9 – 36 VDC
Note: Recommended that a power supply of at least 10 Watts power output is used
2 Amperes at 5 Volts (10 Watts) maximum